Anvil Journeyman T47 adapter question

[Equinox]

Hi all!

I have an Anvil Journeyman and my next build will use a T47 bottom bracket, but I do not have the adapter for one. I have some ideas for how to make one, but am wondering if anyone out there has a picture or info they could share about how Don made them? Thank you!

[rellis]

Earlier post with drawings.

My Hand-me-down Anvil Journeyman Fixture Hot-rodding expedition log

Hi All, As I’m falling further down the framebuilding rabbit hole, I was able to arrange an awesome deal to buy out an old builder’s whole setup, including an older Anvil Journeyman fixture (looks to be a V2 model) and a lot of the associated parts for building traditional 1" and 1 1/8" head tube bikes with English BBs. As my interest at the moment lies with exploring some more “modern” standards, I’m going to be updating this fixture to work with larger headtube/BBs. As anyone who picked up An…

[Equinox]

Appreciate it. This uses a different BB post, but still good info. Thanks!

[Meriwether]

Here is what I have for my Jman 3.1. I think it’s all the measurements you’ll need? It says PF30 but same shell specs.

I bored out the ID so I could fit a 100mm T47 shell but other than that it’s stock. The shelf on one side is a slightly different diameter than the other on purpose, so you can flip it and will stay centered on the fixture before and after reaming the PF30 shell (or welding & chasing T47 threads).