Hi all, I wanted to see if other builders have a specific rule/guideline for locating bridges, specifically for brazing in eyelets to support full size fenders. I’ve got a wheel check tool that can hold a bridge in place, so I’m able to repeat the locations, but wanted to see what others use. Thanks in Advance!
1 Like
20–25mm above the tire is a good place to start.
6 Likes
The distance always seems to get filled up somehow. I use 25mm. I have seen a lot of people that say 10mm. My experience with that is it’s great if you like noisy fenders because stuff is scraping along inside.
2 Likes