Took your feedback into consideration - bumped up the overall wall thickness to 2mm, shortened the leg a bit, and reduced the thickness/length of the protrusion. I need to double check crank clearance still but it’s looking good! Mass is 91g which at $1/g is not so bad all considered.
Lib-Fab-Yoke-v3.step (327.5 KB)
Lib-Fab-Yoke-v3.f3d (520.2 KB)
An interesting comparison - here is the yoke I’m working on (pink) alongside the Lichen gravel yoke (orange) which I had originally designed this frame around.
